Complete Powerpoint slide presentation for forklift instructors. Ready made training course
State the recommended operational procedure for stacking a laden pallet in an industrial racking system with a reach truck
State the recommended operational procedure for stacking a laden pallet in an industrial racking system with a reach truck is question numbertwenty six on the instructor's main set of questions. Please note you may or may not get this question on a forklift operator's training course. The actual answers expected are:
A. Approach the racking location and stop with the load 100mm-150mm from the racking system
B. Reduce the tilt ensuring that the pallet is stable
C. Raise the pallet to the required location height
D. Drive in with the truck and stop with the reach legs within 50mm of the racking system
E. Extend the reach mechanism so the pallet is equally spaced on the beams
F. Ensure that the pallet is level
G. Lower the pallet onto the beam
H. Retract the reach
I. Reverse in a straight line away from the racking system so the fork tips are clear
J. Lower the forks into the travel position
Your wording does not have to be exactly as the answers shown above but should be capable of interpretation so as to mean the same as the answers above.
To read this in a language other than English, please use the Google language translator at the top right of the page.
Back to open question number 1